Q: Can I use NFC to connect my device to my ULTIMATE EARS BOOM?

A: Some smartphones and other devices are NFC-enabled. You can use NFC to connect your device to your ULTIMATE EARS BOOM. Here’s how:

    1. Make sure NFC is enabled on your device (see your device’s documentation for help).
    2. Turn on your ULTIMATE EARS BOOM.

NOTE:

    You might need to place your speaker in pairing mode. Hold down the Bluetooth connect button (above the power button) on your ULTIMATE EARS BOOM until you hear a tone.

  1. Hold your device near your ULTIMATE EARS BOOM (right below the Volume + and – buttons) for up to 10 seconds.
  2. If prompted by your device, confirm the pairing.

You’ll hear an audible confirmation from your ULTIMATE EARS BOOM when the pairing is complete.

IMPORTANT: Your ULTIMATE EARS BOOM stays in pairing mode for 3 minutes. Be sure to try and pair using NFC within 3 minutes.

Additional information

If you aren’t able to pair using NFC, see “Setting up ULTIMATE EARS BOOM” to pair using Bluetooth.