Q: How do I setup my ULTIMATE EARS BOOM?

A: Setting up ULTIMATE EARS BOOM

You can connect your ULTIMATE EARS BOOM to your smartphone, tablet or other device using either Bluetooth® or the auxiliary input.

Bluetooth®

Out of the package, your ULTIMATE EARS BOOM is ready to pair with your first Bluetooth® device. Here’s how:

    1. Turn the speaker on by pressing the power button on the top of the speaker. The power indicator will glow white, the Bluetooth® connect button (above the power button) will blink white rapidly, and you will hear a tone indicating the speaker is ready to pair.
    2. On your device, go to the Bluetooth® menu and scan for devices (make sure Bluetooth® is enabled).
    3. Select ULTIMATE EARS BOOM from the list of devices.

NOTE: ULTIMATE EARS BOOM volume is set to maximum when you pair it to an iOS device.

Once paired and connected, you’ll hear an audible confirmation from the speaker. This means your ULTIMATE EARS BOOM is ready to use. You can pair additional devices with your speaker.

Auxiliary Input

  1. Turn the speaker on by pressing the power button on the top of the speaker.
  2. Connect the speaker to your device using a 3.5mm analog cable (not included).
    NOTE: Use only a 3-pole (non-microphone or inline remote cable) auxiliary cable.

NOTE: The USB connection is solely for charging and updating your ULTIMATE EARS BOOM. It won’t enable you to use your speaker as an audio-output device when connected to a computer.