How do I setup my ROLL 2?

You can connect your ROLL 2 to your smartphone, tablet or other device using either Bluetooth or the auxiliary input.

Bluetooth

Out of the package, your ROLL 2 is ready to pair with your first Bluetooth device. Here’s how:

Turn the speaker on by pressing the power button on the back of the speaker. The Bluetooth connect button (under the power button) will blink rapidly, and you will hear a tone indicating the speaker is ready to pair.

On your Bluetooth device, go to the Bluetooth menu and scan for devices (make sure Bluetooth is enabled).

Select ROLL 2 from the list of devices.

NOTE: ROLL 2 volume default is high when you pair it to an iOS device.

Once paired and connected, you’ll hear an audible confirmation from the speaker. This means your ROLL 2 is ready to use. You can pair additional devices with your speaker.

Auxiliary Input

Turn the speaker on by pressing the power button on the back of the speaker.

Connect the speaker to your Bluetooth device using a 3.5mm analog cable (not included).

NOTE: Use only a 3-pole (non-microphone or inline remote cable) auxiliary cable.

NOTE: If a Bluetooth device is connected to the ROLL 2 while playing audio from an auxiliary connection, the Bluetooth device will take priority and the stream from the auxiliary device will stop.

IMPORTANT: The USB connection is solely for charging your ROLL 2. It won’t enable you to use your speaker as an audio-output device when connected to a computer.

After you setup your ROLL 2 , make sure you download the ROLL 2 app to access all of your speaker’s features.