How do I set up my MINI BOOM?

Setting up the MINI BOOM

You can connect your MINI BOOM to your smartphone, tablet or other device using either Bluetooth or the auxiliary input.

Bluetooth

Out of the package, your MINI BOOM is ready to pair with your first Bluetooth device. Here’s how:

1. Turn the speaker on by sliding the power switch on the back of the speaker to the right.

You’ll see green behind the power switch.

The power indicator to the right of power switch will glow green.

The Bluetooth connect button (on the front of the speaker) will blink blue rapidly.

You’ll hear a tone indicating the speaker is ready to pair.

2. On your device, go to the Bluetooth menu and scan for devices (make sure Bluetooth is enabled).

3. Select MINI BOOM from the list of devices.

NOTE: MINI BOOM volume is set to maximum when you pair it with an iOS device.

Once paired and connected, you’ll hear an audible confirmation from the speaker. This means your MINI BOOM is ready to use. You can pair additional devices with your speaker.

Auxiliary Input

1. Turn the speaker on by sliding the power switch on the back of the speaker to the right.

2. Connect the speaker to your device using a 3.5mm analog cable (not included).

NOTE: Use only a 3-pole (non-microphone or inline remote cable) auxiliary cable.

NOTE: If a Bluetooth device is connected to the MINI BOOM while playing audio from an auxiliary connection, the Bluetooth device will take priority and the stream from the auxiliary device will stop.The USB connection is solely for charging your MINI BOOM. It won’t enable you to use your speaker as an audio-output device when connected to a computer.