How do I setup my MEGABOOM?

You can connect your MEGABOOM to your smartphone, tablet or other device using either Bluetooth or the auxiliary input.


Out of the package, your MEGABOOM is ready to pair with your first Bluetooth device. Here’s how:

  1. Turn the speaker on by pressing the power button on the top of the speaker. The power indicator will glow white, the Bluetooth connect button (above the power button) will blink white rapidly, and you will hear a tone indicating the speaker is ready to pair.
  2. On your Bluetooth device, go to the Bluetooth menu and scan for devices (make sure Bluetooth is enabled).
  3. Select MEGABOOM from the list of devices.

NOTE: MEGABOOM volume is set to maximum when you pair it to an iOS device for the first time.

Once paired and connected, you’ll hear an audible confirmation from the speaker. This means your MEGABOOM is ready to use. You can pair additional devices with your speaker, see “Pairing additional Bluetooth devices with my MEGABOOM”

Auxiliary Input

  1. Turn the speaker on by pressing the power button on the top of the speaker.
  2. Connect the speaker to your Bluetooth device using a 3.5mm analog cable (not included).

NOTE: Use only a 3-pole (non-microphone or inline remote cable) auxiliary cable.

NOTE: If a Bluetooth device is connected to the MEGABOOM while playing audio from an auxiliary connection, the Bluetooth device will take priority and the stream from the auxiliary device will stop.

IMPORTANT: The USB connection is solely for charging your MEGABOOM. It won’t enable you to use your speaker as an audio-output device when connected to a computer.