To pair ULTIMATE EARS BOOM 2 with your mobile device, press and hold the Bluetooth button until you hear the tone.
Go to the Bluetooth settings on your mobile device and select ULTIMATE EARS BOOM 2 from the list.
For NFC-enabled devices, hold your device directly against the ULTIMATE EARS BOOM 2, as shown, to pair and connect.
When powered on, ULTIMATE EARS BOOM 2 automatically reconnects to the last mobile device it was connected to.
ULTIMATE EARS BOOM 2 will automatically turn itself off after 15 minutes of inactivity to save battery life.
Check battery charge level by pressing the + and – volume buttons simultaneously.
ULTIMATE EARS BOOM 2 is made with lifeproof and waterproof materials.
To wash, use warm soapy water.
The ULTIMATE EARS BOOM App (for iOS and Android) allows you to personalize your ULTIMATE EARS BOOM. You can:
ULTIMATE EARS BOOM can connect to two Bluetooth devices at once. This is called “Multi Host” mode. In this mode, two music sources can be switched between quickly by pausing one and playing the other.
The next time the speaker is turned on, it will attempt to reconnect automatically to the last device it was connected to.
In the Double Up section of the app, you can choose how you would like the speakers to behave. There are two options:
You can also Double Up two ULTIMATE EARS BOOMs without the app:
Removable D-Ring with 1/4 -20 tripod mount.
USB / Aux protective cover (removable) helps to protect the 3.5 mm Aux-In Jack and MicroUSB Connector.
A wet or contaminated micro-USB connector may cause excessive heat or melting and may lead to fire damage or personal injury. Always charge your speaker with a clean, dry micro-USB connector.
To save power, ULTIMATE EARS BOOM will turn off automatically after 15 minutes without music or user interaction. ULTIMATE EARS BOOM will make a sound to let you know it is turning off.
To pair ULTIMATE EARS BOOM with additional source devices, press ULTIMATE EARS BOOM’s Bluetooth button for 3 seconds. ULTIMATE EARS BOOM will enter pairing mode, make a sound, and flash its Bluetooth LED while searching for another device. Once the next device is paired with, ULTIMATE EARS BOOM will sound to confirm pairing and the Bluetooth LED will remain solid white for 15 seconds.
ULTIMATE EARS BOOM will remember the last 8 devices it was connected to. The next time the speaker is turned on, it will attempt to reconnect automatically to the last device it was connected to before it was turned off.
To pair ULTIMATE EARS BOOM with the NFC-enabled devices, hold your NFC-enabled phone directly against ULTIMATE EARS BOOM’s NFC tag for 2 seconds. Once the pairing is successful, the speaker will make a sound to confirm. (Some devices may ask for confirmation from the user.) ULTIMATE EARS BOOM’s pairing mode times out in 3 minutes.
Lost your connection?
ULTIMATE EARS BOOM’s Bluetooth range is approximately 15 meters, or 50 feet. If you take your source device out of range, the connection will be suspended. ULTIMATE EARS BOOM will automatically reconnect if the source device is brought back in range within 5 minutes. After 5 minutes, the active connection will be dropped.
Once ULTIMATE EARS BOOM is on and connected, simply select and play any music content from your source device. You can control volume from your source device, or directly on ULTIMATE EARS BOOM.